Every person is unique – and so is your wrist. To ensure that the wooden watch from Holzspecht sits optimally on your wrist, you will find tools, included in your Holzspecht packaging box, to adjust the length of the bracelet to fit your wrist.
How to change the bracelet length
Choose your bracelet:
1. Take your wooden watch and the enclosed tools out of the packaging.
2. Check how many links to remove. To do this, wear the wooden watch and check how many links the bracelet needs to be tightened so that it fits your wrist.
3. Use the pin tool provided to loosen the pins of individual bracelet links on your Holzspecht wooden watch. To do this, apply the pin tool, as shown in the picture, either from the crown side or the other side, depending on the side of the bracelet, and push the pin out using even pressure.
If the pin does not loosen, you can, carefully and gently work with a small hammer. To do this, place the bracelet on the short side, use the pin tool and tap it gently with the hammer. Please put something under the bracelet to avoid damaging the base.
4. Now you can pull out the pin and shorten the bracelet by the desired number of bracelet links.
5. Then connect the bracelet again using a pin. To do this, insert the pin on the correct side (crown side or other side, see drawing) and press it in using even pressure using the pin tool.
WELL DONE! Your wooden watch from Holzspecht is now set to fit your wrist. We wish you much joy with your wooden watch! We wish you much joy with your wooden watch!
1. Take your wooden watch and the enclosed tools out of the packaging.
2. Check how many links to remove. To do this, put on the wooden watch and check how many links the bracelet is too wide.
3. Use the supplied screwdrivers to loosen the connecting pin and screw of individual bracelet links from the Holzspecht wood watch. To do this, place the screwdriver on the side as shown in the picture and then loosen the screw from the connecting pin.
4. Now remove the connecting pins, screw and the desired number of bracelet links.
5. Then connect the bracelet again using the connecting pin. Then carefully insert the screw and tighten it with the screwdriver provided.
WELL DONE! Your wooden watch from Holzspecht is now set to fit your wrist. We wish you much joy with your wooden watch!
Please keep any removed bracelet links, screws and connecting pins in a safe place in case you later change the bracelet length or want to replace individual bracelet links.
Information on using the tool can also be found in the instructions for use that came with your Holzspecht packaging box.
Alternatively, you can have the bracelet adjusted by a watchmaker or jeweler.
And now that your wooden watch is individually fit to suit your wrist, we wish you a lot of joy and precious moments with your wooden watch from Holzspecht!
